Savana 1/2 Ton Van V8-5.3L VIN T (2003)
6. Remove the left instrument panel (IP) insulator.
7. Disconnect the accelerator cable retainer (3) from the accelerator pedal lever (2).
8. Squeeze the accelerator cable cover tangs (1) and push the cable through the dash panel.
9. Remove the accelerator cable.
INSTALLATION PROCEDURE
1. Install the accelerator cable through the dash panel. Snap the accelerator cable cover tangs (1) through the dash panel.
2. Install the accelerator cable through the slot in the accelerator pedal lever (2).
3. Seat the retainer (3) in the accelerator pedal lever (2).
