gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Steering Column > < Power Steering Pulley Replacement|Page 7025
Page 5
background image

13. Connect the lower intermediate shaft to the power steering gear.
14. Install the lower intermediate shaft to the power steering gear retaining bolt.

Tighten the bolt to 61 Nm (45 ft. lbs.). 

15. Install the power steering pump pulley. 
16. Bleed the system. 
17. Remove the drain pan from under the vehicle.

Steering Column > < Power Steering Pulley Replacement|Page 7025