Savana 1/2 Ton Van V8-5.3L VIN T (2003)
4. Remove the wiper motor module assembly.
5. Disconnect the wiper transmission (2) from the wiper motor crank arm (3) using the J 39232.
6. Loosen the wiper motor shaft nut (1).
7. Tap on the screw with a soft-faced mallet while holding up on the wiper motor crank arm (3) until the wiper motor crank arm is loose on wiper
motor shaft.
8. Remove the nut.
9. Remove the wiper motor crank arm from the wiper motor shaft.
INSTALLATION PROCEDURE
1. Install the wiper motor crank arm (3) on the wiper motor shaft while maintaining a 4-8 mm (0.157-0.314 in) gap between the wiper motor crank
arm and the bracket tab.
