Savana 1/2 Ton Van V8-5.7L VIN R (2001)
VCP Remote Control
Simply aim the remote control at the video display and press the desired function button. Be sure the remote batteries are not discharged, which may
reduce sensitivity to receive signals from the remote control. Objects blocking the remote control infrared beam may prevent operation of the VCP.
Battery Installation and Replacement
The battery compartment is on the back of the remote control. To access them simply slide open the battery door. The remote uses 2 AAA dry-cell
batteries. Before using the remote control, be sure to check that the batteries are correctly installed. The positive (+) and negative (-) symbols on the
batteries must match the symbols inside the battery compartment.
Care of the Video Cassette Player
^
A Video Cassette Player (VCP) that is not cleaned regularly can cause reduced sound and video quality, ruined cassettes or a damaged
mechanism.
^
Do not repeatedly load or unload a video cassette without playing it for a short time. Otherwise, the tape may slacken and become damaged.
^
Do not leave video cassettes in the VCP for long periods of time. This could damage the VCP or the tape.
^
Over time as the VCP playback heads become dirty, the video picture may become blurred, interrupted, or noisy. Once this occurs, the VCP likely
requires thorough cleaning.
^
Regular cleaning of the tape heads using a common VHS cassette-style cleaner will increase tape life and reliability of the VCP.
^
To verify that cleaning is necessary, load and play several video tapes to see if the problem persists. If cleaning is required, use a cleaning cassette,
available from consumer electronics outlets. Always follow the manufacturer's instructions.
