Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Tighten the bolts to 23 N.m (17 lb ft).
3. Apply clear silicone sealant around the entire edge of the service hinge to prevent water leaks.
4. Install the door. Refer to Rear Side Door Replacement (See: Service and Repair/Door Replacement - Rear Side) .
5. Adjust adjacent front side door striker as necessary to achieve flushness between the two doors. Refer to Rear Side Door Latch Striker Adjustment
- Front (See: Sliding Door/Sliding Door Striker/Adjustments/Rear Side Door Latch Striker Adjustment - Front) .
6. Install interior trim at pillar. Refer to Upper Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Upper Pillar Garnish Molding Replacement) , Lower Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Lower Pillar Garnish Molding Replacement) , or Center Pillar Upper Garnish Molding Replacement - Right Side (See:
Interior Moulding / Trim/Trim Panel/Service and Repair/Center Pillar Upper Garnish Molding Replacement - Right Side) .