Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Grille: Service and Repair
Grille Replacement
Grille Replacement
Removal Procedure
1. Raise and support the hood.
2. Remove the side marker lamp. Refer to Side Marker Lamp Replacement (RPO T90) Side Marker Lamp Replacement (RPO X88/ Z88) in Lighting
Systems.
3. Remove the park/turn signal lamp. Refer to Parking and Turn Signal Lamp Replacement (RPO X88/Z88) Parking and Turn Signal Lamp
Replacement (RPOT90) in Lighting Systems.
4. Remove the bolts (4) that retain the grille (3) to the radiator support.
5. Remove the retainers at the top of the grille (3) from the radiator support.
6. Lift the grille (3) in order to remove the locating pins (5) on the bottom of the radiator grille (3) from the radiator support.
7. Remove the grille (3) from the vehicle.
Installation Procedure
1. Install the grille (3) to the vehicle.
2. Align the locating pins (5) on the bottom of the grille (3) with the pockets on the radiator support.
Lower the grille (3) into position.
3. Align the locating pin (2) and the retainers at the top of the radiator grille (3) with the slots in the radiator support.
Press the retainers into place.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the bolts (4) that retain the radiator grille (3) to the radiator support.
Tighten the bolts that retain the radiator grille to the radiator support to 1 N.m (9 lb in).
5. Install the park/turn signal lamp. Refer to Parking and Turn Signal Lamp Replacement (RPO X88/Z88) Parking and Turn Signal Lamp
Replacement (RPOT90) in Lighting Systems.
6. Install the side marker lamp. Refer to Side Marker Lamp Replacement (RPO T90)Side Marker Lamp Replacement (RPO X88/ Z88) in Lighting
Systems.
7. Close the hood.
