Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Power Seat Switch: Service and Repair
Power Seat Switch Replacement
Removal Procedure
1. Remove the screws that retain the power seat adjuster switch (5) to the seat cushion (1).
2. Remove the power seat adjuster switch from the seat cushion.
3. Disconnect the electrical connector from the power seat adjuster switch.
4. Remove the power seat adjuster switch from the vehicle.
Installation Procedure
1. Install the power seat adjuster switch (5) to the vehicle.
2. Connect the electrical connector to the power seat adjuster switch.
3. Install the power seat adjuster switch to the seat cushion (1).
Notice: Refer to Fastener Notice .
4. Install the screws in order to retain the power seat adjuster switch to the seat cushion.
Tighten the screws to 2 N.m (18 lb in).
