Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Brake Adjuster: Service and Repair
Adjusting Screw Replacement
Adjusting Screw Replacement
Removal Procedure
1. Install the pin into the park brake lever.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Remove the brake drum.
5. Remove the brake shoe return springs.
6. Remove the brake shoe guide.
7. Remove the hold down springs.
8. Remove the hold down pins.
9. Remove the actuator lever and the actuator lever pivot.
