Savana 1/2 Ton Van V8-5.7L VIN R (2001)
7. Install the brake shoe return springs.
8. Install the brake drum.
9. Remove the pin to the park brake lever.
10. Install the tire and wheel assembly.
11. Adjust the brakes.
12. Lower the vehicle.
13. With the engine OFF, gradually apply the brake pedal approximately 2/3 of it's travel distance.
14. Slowly release the brake pedal.
15. Wait 15 seconds, then repeat steps 13-14 until a firm brake pedal is obtained. This will properly seat the wheel cylinders and brake shoes.
