gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Hydraulic Brake Booster Pump > < Alarm Module Replacement|Page 7170
Page 3
background image

Tighten the inlet hose fitting to the power brake booster to 36 Nm (27 ft. lbs.).

6. Connect the outlet hose to the power brake booster.

Tighten the outlet hose fitting to the power brake booster to 36 Nm (27 ft. lbs.).

7. Install the power steering fluid reservoir hose to the power brake booster with new clamps.

Tighten the power steering fluid reservoir hose fitting to the power brake booster to 36 Nm (27 ft. lbs.).

8. Install the brake master cylinder to the vehicle. 
9. Bleed the power steering system. 

Hydraulic Brake Booster Pump > < Alarm Module Replacement|Page 7170