gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Distributor Overhaul|Page 2687 > < Distributor Overhaul|Page 2685
Page 9
background image

17. Install the new oil seal gasket under the mounting flange of the distributor base.
18. Install the distributor.
19. Install the electrical connector to the distributor.
20. Install the spark plug wires to the distributor cap.

IMPORTANT:  The ignition coil wire must not touch anything. Rubbing will ground or short the wire after a short time.

21. Install the ignition coil wire.
22. Install the engine cover.

Distributor Overhaul|Page 2687 > < Distributor Overhaul|Page 2685