Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Remove the heater case.
2. Remove the retaining screws from the actuator.
3. Remove the mode actuator from the vehicle.
INSTALLATION PROCEDURE
1. Install the mode actuator to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the retaining screws to the actuator.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Install the heater case.
Recirculation Actuator Replacement
REMOVAL PROCEDURE
