Savana 1/2 Ton Van V8-5.7L VIN R (2001)
5. For banjo-style fittings; carefully slide the new O-ring seal (1) onto the A/C refrigerant hose until seated.
Leave a light coating of the refrigerant oil to remain on the A/C refrigerant hose in the area indicated (2) ONLY.
6. Install the A/C refrigerant hose to the A/C refrigerant component.
7. For compression-style fittings; use a back-up wrench on the A/C refrigerant component (smaller size) fitting (2), then tighten the A/C refrigerant
hose (larger size) fitting (1) to specification.
8. For banjo-style fittings; install the bolt retaining the A/C refrigerant hose to the A/C refrigerant component, then tighten to specification.
9. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fitting(s) of the repaired or reinstalled component using the J 39400-A.
