Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Install the evaporator core to the module.
2. Install the evaporator front cover.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the evaporator case front cover retaining screws.
Tighten
Tighten the screws to 6 N.m (53 lb in).
4. Install the keep cover.
5. Install the evaporator tube to the evaporator.
6. Install the accumulator.
7. Connect the electrical connectors.
8. Install the coolant recovery reservoir or surge tank.
9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the components using the J 39400-A.
