gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fog Lamp Bulb Replacement - Front (Luxury Y91)|Page 11196 > < Fog/Driving Lamp Bulb|Service Precautions
Page 1
background image

Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb Replacement - Front (Luxury Y91)

REPLACEMENT PROCEDURE

CAUTION:  Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To
help avoid personal injury:

-

Turn off the lamp switch and allow the bulb to cool before changing the bulb.

-

Leave the lamp switch OFF until the bulb change is complete.

-

Always wear eye protection when changing a halogen bulb.

-

Handle the bulb only by its base. Avoid touching the glass.

-

Keep dirt and moisture off the bulb.

-

Properly dispose of the used bulb.

-

Keep halogen bulbs out of the reach of children.

1. Disconnect the electrical connector (2) from the back of the fog lamp bulb (1).

2. Remove the fog lamp bulb (2) from the lamp housing (1) by turning counterclockwise 45 degrees.
3. Remove the bulb.
4. Discard the inoperative bulb.

INSTALLATION PROCEDURE

Fog Lamp Bulb Replacement - Front (Luxury Y91)|Page 11196 > < Fog/Driving Lamp Bulb|Service Precautions