Savana 1/2 Ton Van V8-5.7L VIN R (2001)
4. Remove the steering gear outlet hose (1) from the steering gear (2).
5. Remove the hose from the vehicle.
Installation Procedure
Notice: Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
1. Route the hose in the same position the hose occupied prior to removal.
2. Smoothly route the hose in order to avoid sharp bends and kinking.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power brake booster outlet hose (1) to the power brake booster (2).
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
