Savana 1/2 Ton Van V8-5.7L VIN R (2001)
10. Remove the bolts from the fuel mixer housing bracket (6).
11. Remove the bracket (7) from the vehicle.
12. Remove the fuel supply clamp and hose (5) from the fuel mixer.
13. Remove the idle solenoid clamp and hose (4) from the idle solenoid.
14. Remove the fuel control solenoid clamp and hose (3) from the fuel solenoid.
15. Remove the throttle body adapter nut (2).
16. Remove the throttle body adapter (1) and the fuel mixer housing (8) as an assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the throttle body adapter (1) and the fuel mixer housing (8) as an assembly into the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the throttle body adapter nut (2).
Tighten
Tighten the nut to 4 N.m (35 lb in).
Install the fuel control solenoid hose and clamp (3) from the fuel solenoid.
3. Install the idle solenoid hose and clamp (4) from the idle solenoid.
4. Install the fuel supply hose and clamp (5) to the fuel mixer.
5. Loosely install all 3 mounting bolts (6) and the bracket (7).
Tighten
^
Tighten the bracket to A/C bolt to 28 N.m (21 lb in).
