gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Distributor Overhaul|Page 1682 > < Distributor Overhaul|Page 1680
Page 9
background image

Important: The ignition coil wire must not touch anything. Rubbing will ground or short the wire after a short time.

12. Install the ignition coil wire.

Important: If the malfunction indicator lamp illuminates after installing the distributor and DTC P1345 is set, the distributor has been installed
incorrectly.

13. Repeat Installation Procedure 2 if the malfunction indicator lamp illuminates after installing the distributor.
14. Install the engine cover.

 

 

 

 

Distributor Overhaul|Page 1682 > < Distributor Overhaul|Page 1680