gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Malfunction Indicator Lamp (MIL) Always On|Page 4179 > < Malfunction Indicator Lamp (MIL) Always On|Page 4177
Page 3
background image

^

The MIL illuminates during a bulb test and a system test.

^

A Diagnostic Trouble Code (DTC) will be stored if a MIL is requested by the diagnostic.

MIL ILLUMINATION
^

The MIL will illuminate with ignition switch ON and the engine not running.

^

The MIL will turn OFF when the engine is started.

^

The MIL will remain ON if the self-diagnostic system has detected a malfunction.

^

The MIL may turn OFF if the malfunction is not present.

^

If the MIL is illuminated and then the engine stalls, the MIL will remain illuminated so long as the ignition switch is ON.

^

If the MIL is not illuminated and the engine stalls, the MIL will not illuminate until the ignition switch is cycled OFF, then ON.

DIAGNOSTIC AIDS

If the problem is intermittent, refer to Intermittent Conditions.  See: Testing and Inspection/Symptom Related Diagnostic Procedures/Standard Model
(Non-Alternative Fuels)/Intermittent Conditions

TEST DESCRIPTION

Steps 1-6

The number below refers to the step number on the diagnostic table.
2. The step determines if the condition is with the MIL control circuit or the PCM.

Malfunction Indicator Lamp (MIL) Always On|Page 4179 > < Malfunction Indicator Lamp (MIL) Always On|Page 4177