Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Install the ECM adapter bracket into the vehicle ensuring that the bracket is placed on the loosened forward bolt (9).
2. Install the rear ECM adapter bracket bolt (8).
3. Install the fender support rod (1) and bolt (2)
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the fender support rod to ECM adapter bracket bolt (3).
Tighten
Tighten the front ECM adapter bracket bolt (9) to 24 N.m (18 lb ft).
Tighten
Tighten the rear ECM adapter bracket bolt (8) to 24 N.m (18 lb ft).
Tighten
Tighten the support rod bolt (2) at the fender to 24 N.m (18 lb ft).
Tighten
Tighten the support rod bolt (3) at the adapter bracket to 12 N.m (108 lb in).
5. Install the ECM mounting bracket (5) to the ECM adapter bracket (4) using the four bolts (6).
Tighten
Tighten the four mounting bolts to 12 N.m (106 lb in).
6. Connect the electrical connectors (2, 4) to the Alternative Fuels ECM (1) and install the connector position assurance locks (3).
