Savana 1/2 Ton Van V8-5.7L VIN R (2001)
9. Align the square slot in the reluctor wheel with the CMP sensor.
10. Remove the CMP sensor screws.
11. Remove the CMP sensor.
INSTALLATION PROCEDURE
IMPORTANT: Do not use the old cap, CMP sensor, and rotor screws. Use replacement screws that have been coated with a thread locking
compound. Precoated replacement distributor cap and CMP sensor screws can be acquired in the GM P/N 10475922 (pkg of 10 screws). Precoated
replacement rotor screws can be acquired in the GM P/N 10475924 (pkg of 10 screws).
