Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Knock Sensor: Service and Repair
REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle
4. Remove the knock sensor harness connector.
5. Remove the knock sensor (2).
INSTALLATION PROCEDURE
NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.