Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Fuel: Service and Repair
Fuel Control Solenoid (FCS) Replacement
TOOLS REQUIRED
J 41416 Ultrasonic Leak Detector
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Disconnect the low pressure regulator reference line (3) at the solenoid (7).
3. Remove the spring clamp and atmospheric reference hose from the solenoid (7).
4. Disconnect the electrical connector. The fuel control solenoid connector is black.
5. Remove the 2 solenoid mounting bolts (6).
6. Remove the solenoid.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Position the solenoid (7) and install the 2 mounting bolts (6).
Tighten
Tighten the bolts to 12 N.m (106 lb in).
2. Connect the atmospheric reference hose and the spring clamp.
