Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Fuel Pressure Test Port: Service and Repair
FUEL PRESSURE CONNECTION VALVE REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the fuel pressure connection valve cap (3).
3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
4. Use a standard valve core tool in order to remove the valve core (2).
INSTALLATION PROCEDURE
1. Use a standard valve core tool in order to install a new valve core (2).
2. Connect the negative battery cable.
3. Inspect for leaks:
3.1. Turn the ignition ON for 2 seconds.
3.2. Turn the ignition OFF for 10 seconds.
3.3. Turn the ignition ON for 2 seconds.
3.4. Inspect for fuel leaks.
4. Install the fuel pressure connection valve cap (3).
