Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Connect the fuel line (4) to the front tank high pressure lock-off fitting (3) using new O-rings. Lubricate the O-ring with petroleum jelly or
equivalent before installation.
Tighten
Tighten the fuel line fitting to 37 N.m (27 lb ft).
2. Connect the fuel line (4) to the rear tank high pressure lock-off fitting (6) using new O-rings. Lubricate the O-ring with petroleum jelly or
equivalent before installation.
Tighten
Tighten the fuel line fitting to 37 N.m (27 lb ft).
3. Connect the negative battery cable.
4. Prime the CNG fuel system by cycling the ignition ON and OFF several times.
5. Start the engine and use the J 41416 in order to inspect for CNG fuel system leaks at each serviced fitting.
6. Install the fuel tank shield.
