Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Install the fill valve cover tether (3) with the hold down pin (4) into the mounting cup (1).
2. Install the fill valve cover (2) to the mounting cup (1).
Fill Valve Filter Replacement
REMOVAL PROCEDURE
1. Remove the O-ring (1).
2. Remove the circlip (2).
3. Remove the fill valve filter (3).
4. Clean the filter in solvent.
5. Blow dry the filter using compressed air.
6. Be sure that the filter passages are clear. Replace the filter if needed.
INSTALLATION PROCEDURE