Savana 1/2 Ton Van V8-5.7L VIN R (2001)
7. Install the shim washer (1) on the bottom of the distributor shaft.
8. Install the tang washer.
9. Install the round washer.
10. Install the driven gear according to the index marks.
11. Install the gear and align the white paint mark on the bottom stem of the distributor and the pre-drilled indent hole in the bottom of the gear (3).
12. Determine if the driven gear is installed incorrectly. The dimple will be approximately 180 degrees opposite the rotor segment when installed in
the distributor.
CAUTION: Refer to Safety Glasses Caution in Service Precautions.