Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Install EBCM(2) to BPMV(4).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the EBCM bolts (1).
Tighten the bolts to 5 Nm (39 inch lbs.) in an X-pattern.
3. Connect the electrical connectors to the EBCM.
4. Install the EHCU Shield.
Tighten the bolts to 12 Nm (8 ft. lbs.).
5. Lower the vehicle.
6. Revise the tire calibration using the Scan Tool.
7. Return to Diagnostic System Check. Refer to Diagnostic System Check - ABS.
See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check
