gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Impact Sensor > < SIR Coil Assembly|Page 8804
Page 4
background image

6. Install the SIR steering wheel module coil retaining ring. Verify that the ring (1) is firmly seated in the groove on the upper shaft (2).

7. Install the wire harness assembly (4) into the wire strap (5).
8. Install the wire harness strap (2) into the wire strap (1).
9. Install the wire harness straps (3) to the wire harness assembly.

10. Install the steering column trim covers.
11. Enable the SIR system.

Impact Sensor > < SIR Coil Assembly|Page 8804