Savana 1/2 Ton Van V8-5.7L VIN R (2001)
1. Install the relay rod (4) to the idler arm (1,6).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the connecting rod to the relay rod. Ensure that the seal is on the stud.
-
Tighten the J 29793, or the J 29194 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
3. Remove the tool.
4. Install the retaining nuts to the idler arms and the connecting rod. Use new torque prevailing nuts.
-
Tighten the nuts to 47 Nm (35 ft. lbs.).
5. Install the inner tie rod to the relay rod. Refer to Tie Rod Replacement.
6. Remove the safety stands.
7. Lower the vehicle.