Savana 1/2 Ton Van V8-5.7L VIN R (2001)
6. Remove the nuts (4) retaining the reservoir (3) to the vehicle.
Remove the reservoir.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the reservoir (3) to the vehicle.
-
Tighten the reservoir retaining nuts to 7 Nm (62 inch lbs.).
2. For vehicles with hydroboost, install the hose to the vehicle.
3. Install the clamps retaining the reservoir inlet hose (3) to the hydraulic brake booster (2).
