gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

P/S Cooler Pipe/Hose Replacement|Page 8087 > < P/S Cooler Pipe/Hose Replacement|Page 8085
Page 5
background image

4. Install the power steering outlet hose (1) to the steering gear (2).
5. Check the power steering fluid level. Refer to Checking and Adding Power Steering Fluid.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system. 

Power Steering Gear Inlet Hose Replacement

Power Steering Gear Inlet Hose Replacement

Removal Procedure

Notice:  Refer to Power Steering Hose Disconnected Notice in Service Precautions.

1. Install a drain pan under the vehicle.
2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
3. Remove the power steering inlet hose (2) from the steering pump (1).

4. Remove the steering gear inlet hose (1) from the steering gear (2).
5. Remove the hose from the vehicle.

Installation Procedure

Notice:  Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.

P/S Cooler Pipe/Hose Replacement|Page 8087 > < P/S Cooler Pipe/Hose Replacement|Page 8085