gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Power Steering Motor > < P/S Cooler Pipe/Hose Replacement|Page 8090
Page 10
background image

1. Install the hose (3) to the power steering pump.
2. Install the hose to the power steering reservoir (1).

Make sure the clamps are positioned at the end of the hose.

3. Fill the power steering reservoir with fluid. Refer to Checking and Adding Power Steering Fluid.
4. Bleed the power steering system. 

Power Steering Motor > < P/S Cooler Pipe/Hose Replacement|Page 8090