gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Steering Column > < Power Steering Pump Flow Control Valve Replacement|Page 8113
Page 2
background image

3. Ensure that the power steering pump pulley is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 inch)

.

4. Install the drive belt. Refer to Drive Belt Replacement in Engine.
5. Install the upper fan shroud. Refer to Fan Shroud Replacement in Cooling System.

Steering Column > < Power Steering Pump Flow Control Valve Replacement|Page 8113