Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Surface indentations in the raceway can be caused by roll either under impact loading or vibration while the bearing is not rotating. Replace the
bearing if rough or noisy. Replace the shaft if damaged.
Indentations
Surface depressions on race and rollers can be caused by hard particles of foreign material. Clean all of the parts, including the housing. Check the
seals. Replace the bearings if rough or noisy. Replace the shaft if damaged.
Single Edge Pitting
Flaking of surface metal results from fatigue, usually at one edge of race and rollers. Replace the bearing. Clean all related parts. Replace the shaft if
damaged.
Double Edge Pitting
