Savana 1/2 Ton Van V8-5.7L VIN R (2001)
9. Install the oil pass cover and the oil pass cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
10. Install the 1-2 accumulator piston with the piston legs facing toward the case.
11. Install the oil seal ring to the accumulator cover.
12. Install the 1-2 accumulator spring onto the piston.
13. Install the 1-2 accumulator cover and the cover bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
14. Remove the J 25025-B from the transmission case.
15. Install the control valve body.
Accumulator Assembly
Accumulator Assembly
Removal Procedure
