Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Front Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Window Channel Replacement
Removal Procedure
1. Remove the front door trim panel. Refer to Door Trim Panel Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair) .
2. Remove the front door rear garnish. Refer to Front Side Door Rear Garnish Molding Replacement () .
3. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair
4. Lower the front door window.
5. Remove the inner window sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement (See: Door Window Sealing
Strip/Front Side Door Window Belt Inner Sealing Strip Replacement) .
6. Remove the outer window sealing strip. Refer to Outer Belt Sealing Strip Replacement (See: Door Window Sealing Strip/Front Side Door
Window Belt Outer Sealing Strip Replacement) .
7. Remove the bolt (2) that retains the front run channel (1) to the door.
8. Remove the front run channel (1) from the door.
9. Raise the front window approximately half way in order to access the nuts (5) that retain the front door window to the sash. Access the nuts (5)
through the holes in the front door module.
10. Remove the nuts (5) that retain the front door window to the sash.
11. Remove the front door window from the door from the outside of the vehicle.
12. Remove the bolt (2) that retains the rear run channel (1) to the door.
13. Remove the rear run channel (1) from the door.
Installation Procedure
1. Install the rear run channel (1) to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolt (2) in order to retain the rear run channel (1) to the door.
