gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Wiper Motor Cover Replacement|Page 12134 > < Diagram Information and Instructions|Page 12131
Page 1
background image

Wiper Motor: Service and Repair
Wiper Motor Cover Replacement

REMOVAL PROCEDURE

1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Disconnect the electrical connector from the wiper motor.

4. Remove the 3 screws and the wiper motor cover from the wiper motor.

INSTALLATION PROCEDURE

NOTE:  Refer to Fastener Notice in Service Precautions.

Wiper Motor Cover Replacement|Page 12134 > < Diagram Information and Instructions|Page 12131