gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Rear Door Inside Handle Bezel Replacement|Page 14645 > < Rear Door Inside Handle Bezel Replacement|Page 14643
Page 8
background image

Tighten the screw (2) to 2.0 N.m (18 lb in).

5. Install the armrest (3).
6. Install the rear side door trim plate.

Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door)

Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door)

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

1. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1).
2. Carefully pull the door trim panel (1) out of the retainers around the window opening.

A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

3. Remove the front door panel (1) from the vehicle.

Installation Procedure

1. Install the door trim panel (1) to the door by performing the following:

Align the door trim panel (1) to the retainers in the window opening.

2. Push towards the door to engage the retainers.
3. Align the retainers on the edges of the lower portion of the door trim (1).
4. Push towards the door to engage the retainers.

Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 60 Door)

Rear Door Inside Handle Bezel Replacement|Page 14645 > < Rear Door Inside Handle Bezel Replacement|Page 14643