Savana 1500 RWD V6-4.3L (2007)
Upper Sliding Door Roller: Service and Repair
Rear Side Door Upper Roller Bracket Replacement
Rear Side Door Upper Roller Bracket Replacement
Removal Procedure
1. Remove the sliding side door upper roller bracket cover.
2. Remove the sliding side door upper track garnish molding.
3. Remove the sliding door garnish molding.
4. Remove the bolts that retain the upper roller bracket to the door.
5. Remove the sliding side door upper roller bracket from the rear of the upper track.
6. Remove the sliding side door upper roller bracket from the vehicle.
Installation Procedure
1. Install the sliding door upper roller bracket to the vehicle.
2. Install the sliding door upper roller bracket to the rear of the upper track.
Notice: Refer to Fastener Notice.
3. Install the bolts that retain the upper roller bracket to the door.
Tighten the bolts to 25 N.m (18 lb ft).
4. Install the sliding side door upper track garnish molding.
5. Install the sliding door garnish molding.
6. Install the sliding side door upper roller bracket cover.
