Savana 1500 RWD V6-4.3L (2007)
2. Remove the rear floor trim plate from the vehicle.
3. Inspect the rear floor trim plate for broken or missing retaining clips, and replace when needed.
Installation Procedure
1. Install the rear floor trim plate to the vehicle.
2. Position the rear floor trim plate and press down in order to engage the retaining clips.
Upper Pillar Garnish Molding Replacement
Upper Pillar Garnish Molding Replacement
Removal Procedure
1. Remove the front seat belt from the front seat belt height adjuster.
2. Grasp and gently pull the garnish molding in order to release the retaining clips.
3. Remove the front door upper pillar garnish molding from the vehicle.
4. Inspect the front door upper pillar garnish molding for broken or missing retaining clips.
Installation Procedure
