Savana 1500 RWD V6-4.3L (2007)
1. Install the cable.
2. Snap the retainer tabs into the frame bracket.
3. Connect the front cable (2) to the intermediate cable (3).
4. Route the cable in through the floor pan and engage the grommet (1).
5. Remove the safety stands.
6. Lower the vehicle.
7. Install the cable anchor to the stud on the floor.
Notice: Refer to Fastener Notice.
8. Install the anchor nut.
Tighten the nut to 13 N.m (115 lb in).
9. Roll the carpet into place.
10. Install the park brake pedal.
11. Adjust the park brake system. Refer to Park Brake Adjustment.
Parking Brake Intermediate Cable Replacement
Parking Brake Intermediate Cable Replacement
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
