Savana 1500 RWD V6-4.3L (2007)
7. Release the C-clamp.
8. Remove the nut from the stud.
9. Remove the J 26889.
Notice: Refer to Fastener Notice.
10. Install the master cylinder to the hydraulic booster.
Tighten the nuts to 36 N.m (27 lb ft).
7. Release the C-clamp.
8. Remove the nut from the stud.
9. Remove the J 26889.
Notice: Refer to Fastener Notice.
10. Install the master cylinder to the hydraulic booster.
Tighten the nuts to 36 N.m (27 lb ft).