Savana 1500 RWD V6-4.3L (2007)
Coolant Reservoir: Service and Repair
Radiator Surge Tank Inlet Hose/Pipe Replacement
Radiator Surge Tank Inlet Hose/Pipe Replacement
Removal Procedure
Tools Required
J 38185 Hose Clamp Pliers
Caution: To avoid being burned, do not remove the radiator cap or surge tank cap while the engine is hot. The cooling system will release
scalding fluid and steam under pressure if radiator cap or surge tank cap is removed while the engine and radiator are still hot.
1. Partially drain the cooling system.
2. Using J 38185 reposition the surge tank inlet hose clamps.
3. Remove the surge tank inlet hose from the surge tank.
4. Remove the surge tank inlet hose from the radiator.
Installation Procedure