Savana 1500 RWD V6-4.3L (2007)
4. Install the heater inlet hose and the heater outlet hose to the coolant bypass valve.
5. Reposition the heater inlet hose clamp and the heater outlet hose clamp to the coolant bypass valve using the J 38185.
6. Install the vacuum hose to the coolant bypass valve.
7. Install the accumulator.
8. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac N Fill).
9. Install the upper fan shroud.
10. Install the air cleaner.
