Savana 1500 RWD V6-4.3L (2007)
8. Remove the bolts and the balance shaft retainer.
Important: The balance shaft and the balance shaft front bearing are serviced only as a package. Do not remove the balance shaft front
bearing from the balance shaft.
9. Use a soft-faced hammer in order to remove the balance shaft from the engine block.
10. Clean and inspect the balance shaft. Refer to Balance Shaft Cleaning and Inspection.
Installation Procedure
Important: The balance shaft and the balance shaft front bearing are serviced only as an assembly. Do not remove the balance shaft front
bearing from the balance shaft.
1. Apply clean engine oil to the balance shaft front bearing. Refer to Sealers, Adhesives, and Lubricants for the correct part number.
Caution: Refer to Safety Glasses Caution.
2. Use the J 36996 and the J 8092 in order to install the balance shaft.
