Savana 1500 RWD V6-4.3L (2007)
Important: In order to install the distributor for the correct engine timing, position the engine to number one cylinder top dead center
(TDC).
16. Remove the spark plug for number one cylinder.
17. Rotate the crankshaft until number one cylinder is in the compression stroke.
18. Align the 2 reference marks on the crankshaft balancer (1) and (4) with the 2 alignment marks (2) and (3) on the front cover.
19. Install the spark plug.
20. Install the distributor.
21. Install the upper intake.
22. Install the accelerator control cable bracket, studs, and nuts to the intake manifold and the throttle body.
Tighten the accelerator control cable bracket nuts and studs to 12 N.m (106 lb in).
