Savana 1500 RWD V6-4.3L (2007)
Important: After assembly, the hose clamp tangs (water pump end) must point forward and the upper tang should be level with the
outside diameter of the water pump inlet hose.
5. Install the water pump inlet hose.
6. Position the water pump inlet hose clamps.
7. Install the radiator outlet hose to the water pump.
8. Install the radiator outlet hose to the surge tank.
9. Position the radiator outlet hose clamps at the surge tank and water pump.
10. Install the drive belt.
11. Install the cooling fan.
12. Install the air cleaner outlet resonator duct.
13. Install the air cleaner assembly.
14. Fill the cooling system.
15. Inspect the cooling system for leaks.
