Savana 1500 RWD V6-4.3L (2007)
4. Connect the low pressure sensor electrical connector (1).
5. Install new sealing washers.
6. Install the evaporator outlet hose.
7. Install the evaporator outlet hose retaining nut (1) to the accumulator.
Tighten the nut to 16 N.m (12 lb ft).
8. Install the compressor inlet hose.
9. Install the compressor inlet hose retaining nut (2) to the accumulator.
Tighten the nut to 16 N.m (12 lb ft).
10. Install the coolant reservoir.
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the component using the J 39400-A.
