gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Air Temperature Actuator Replacement|Page 13282 > < Air Temperature Actuator Replacement|Page 13280
Page 4
background image

1. Install the lower mode actuator.
2. Press lower mode actuator on until you hear tabs engage.
3. Install the I/P carrier.

Recirculation Actuator Replacement

Recirculation Actuator Replacement

Tools Required

 J 39400-A Electronic Halogen Leak Detector

Removal Procedure

1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging.
2. Disconnect the low pressure sensor electrical connector.
3. Disconnect the blower motor electrical connector.
4. Disconnect the blower motor resistor assembly electrical connector.

5. Remove the evaporator outlet hose retaining nuts (4, 5).

6. Remove the retaining nut (3) from the evaporator inlet tube (5).
7. Remove the evaporator inlet tube from the evaporator.
8. Remove the sealing washers.

Air Temperature Actuator Replacement|Page 13282 > < Air Temperature Actuator Replacement|Page 13280